WholeBody
®
ROVE
Remote Control User Guide
POWER / RESTORE
— Press to activate the
tablet remote. Press again to stop all function
and restore the chair to the upright position.
PAUSE
— Press to pause all functions
immediately. Press again to resume.
See page 2 to learn more about
the on-screen indicators
ZEROG
®
—
Tap to recline the chair to the zero
gravity position for maximum spinal relief.
POSITION
—
Press and hold to adjust the
backrest and foot and calf massager positions
to exactly where you need it.
AUTO
— Tap repeatedly to toggle through
the massage programs.
MANUAL HEIGHT ADJUST
— After the
AcuPoint
®
Detection has completed its
scan, should you wish to adjust the vertical
massage range differently, press and hold the
arrows to do so.
DEMO
— Tap to start the Demo program.
CLOUD TOUCH ACCUPRESSURE
— In manual
mode, tap repeatedly to toggle through three
Cloud Touch zones (Full, Upper, or Lower).
MANUAL
— Tap repeatedly to toggle through
five massage techniques.
SPEED
— In manual mode, tap repeatedly to adjust the
massage Speed (except in Rolling mode).
WIDTH
— In manual mode, tap repeatedly to adjust the
massage roller Width (except in Kneading modes).
SPOT
— When using Spot manual mode, press
and hold to adjust the vertical massage roller
position.
RANGE
— In manual mode, tap repeatedly
to toggle between a Full, Zone, or Spot
massage Range.
HEAT
— Tap to turn Heat On/Off.
ROLLERS
— Tap to turn Foot Rollers On/Off.
CLOUD TOUCH INTENSITY
— Tap repeatedly
to adjust the Cloud Touch intensity.
DURATION
— Tap repeatedly to toggle through
massage timer settings (default is 20 minutes).