Installing your
Perfect Chair
®
Wedge Spanner Table.
Place the first chair on its side on a soft surface with the
side on which you want to mount the table facing up.
GET READY
Remove the two bolts shown in Fig. 2. Save both
bolts in case you wish to restore your chair to its
original configuration later.
NOTE: While removing the two screws, one or
more barrel nuts may fall out of the cross bar
on the chair frame. If this occurs, reinsert the
barrel nut onto the cross bar, then turn it so
that the notch in the barrel nut runs parallel
to the chair leg.
1
2
Fig. 2
Fig. 1
Parts
Mounting bracket (2)
Small spacer (6)
Allen key
(1 long, 1 short)
Short bolt
Long bolt
Table
Spacer wire (1 long, 1 short)
Mounting screw
pin (4)
Locking knob (4)
Back leg
Front leg
Front leg
Locking knob
Mounting
bracket
Mounting
pin
Install a locking knob on the underside of each mounting
pin to secure the table firmly to the mounting brackets.
Install the locking knob large end facing up.
Your PC Spanner table installation is now complete.
Retain the four bolts you removed from your chairs in
case you want to return your chairs to their original
configuration. You can also add more spanner tables
and chairs to expand your layout. Enjoy!
9
10
Back leg
Please send any questions or comments regarding these instructions to:
© 2011 Human Touch
®
, LLC.
PC-WST-A0
Questions? Call Human Touch Customer Service at 800-355-2762.