Technical specification
• Class II protection against electrical
shock
• IP class IPX0
• Manufacturer: Globtek with item
number: GS-1698
• Input 100-240V AC 1.6A Max , 50-60
Hz
• Output 27,8V, 0.8 A, DC
• Short circuit protected
• Polarization protected
• Overheating protected
• Charging time for batteries that are
totally discharged about 6 hours.
The charger is CE-marked and complies with the
requirements according, EN 60601-1 (Electrical
safety) and EN 60601-1-2 (EMC).
Charging
When in use with 5000 series lifts:
Insert the remote control from the lift into the
charger. If the LED on the charger is amber,
charge until the LED turns green.
Inspection and care
When necessary, disconnect the charger from
the mains and the charger can be cleaned with
a damp cloth with dishwashing liquid. Do NOT
use any strong detergents.
If disinfecting the product DuPontTM Virkon® is
to be used.
Never flush the charger with water or other
liquids.
Regularly check that the unit and cords does
not show signs of damage.
Annual inspection
The charger should be inspected together with
the lift system. Pay particular attention to parts
that show wear.
Recycling
Rejected chargers can be returned to Human
Care for recycling or returned to recycling
facility for electronics.
ENG
ENG
ENG
Содержание 71470
Страница 1: ...User manual Charger with holder...