KD100
Quick Start Guide*1
Product Connection
The product supports two ways of wired connection and wireless connection, please
choose these ways to connect according to the usage.
1. Wired Connection
Connect the tablet to your computer with USB cable. Please follow the steps below:
1. Take out the USB cable from the package, then connect Keydial to your computer.
2. Please download the Keydial Driver from our website:
. Besides, you don't need
to download the driver anymore if you already installed the other display or tablet driver(V15).
They can work together with one driver.
3. Open the driver interface, the device picture will be displayed on the interface, indicating that
the tablet is successfully connected to the computer.You can start use the tablet.
2. Wireless connection
Please follow the steps below:
1. Insert the wireless receiver to your computer.
2. Switch the power button on to power on the Keydial.
3. Not using 15 mins, the tablet will enter sleep mode. In this case, you need to switch the power
3 / 21
