HUGONG EDGE 190L, Руководство пользователя

Страница: 6 / 17

5
* There will be sparks flying during operating, keep distance between working field
and vicinity.
* Operating should be within duty-cycle. Over load will cause accelerated components
aging and decreased use life, even machine damage.
* Do not modulate or move the machine during operation.
* Welders have strong electromagnetism and frequency interference, so keep away people with heart
pacemaker or the articles which can be interfered by electromagnetism and frequency.
* Do not squeeze or smite the welding cable.
* Do not allow irrelevant people go to welding operation field.
2.4. Safe Measures to be taken to assure the correct Installation and Position
* Precaution must be taken to keep the operator and the machine from the foreign materials falling
from up above.
* The machine must be installed in the place where it can not be exposed to sun and rain. Also it
must be stored in less humid place with the temperature range at − 10~40°C.
* The machine should be placed at horizontal position, in case of turnover or shift.
* There should be 50cm space about for the welding machine to have good ventilation.
* Make sure that there is no metal-like foreign body to enter the welding machine
* Make sure that there is no interference with the surrounding area at the installation site.
* Take measures to prevent wind while operating in the strong wind since the welder is gas shielded.
2.5 Safety Check
Each item listed below must be carefully checked before operation:
* Make sure that the welding machine has reliable earth connection.
* Make sure input/output cable in good condition and no exposure.
Regular check needs to be conducted by the qualified personnel after the welder has been installed
over a period of six months, which involves as follows:
* Routine cleaning needs to be done to make sure that there is no abnormal loose parts happening in
the welding machine.
* The parts installed on the panel must guarantee that the welder works properly.
* Check the welding cable to see if it can continue to be used before it is worn out.
Notice: Cut off the power supply before opening the case to check.
Please do not hesitate to contact us for technical assistance whenever you come across the problems
you can not work out or you may deem difficult to fix.
3. Technical Specification
3.1 Environment to Which the Product is Subject
* The surrounding temperature range: when working: -5
～ ＋
40
℃
During transport or in storage:
－
25
～ ＋
55
℃ 。
* Relative humidity: when at 40
℃
:
≤
50%,
when at 20
℃
:
≤
90%.
*The height above the sea: below 1000m
* Keep from raining when it is used outdoor.