20
B.FILL
Set Bar Fill Mode
This function is used to control how the bar display changes color. The
B.COL
function is used
to set the colors.
Five different regions in the bar display are defined by
AL1
through
AL4
:
•
>
AL1
•
AL1
to
AL2
•
AL2
to
AL3
•
AL3
to
AL4
•
<
AL4
The color of the bar in each of these regions may be defined by the
B.COL
function.
Press
ENTER/SAVE
Press
INCREASE
DECREASE
The display will show the current Bar Fill setting. Options for this setting and
the order they appear are shown below.
Pressing the INCREASE or DECREASE pushbutton will cycle through the
options shown below.
TriColor mode. The bar is one solid color that changes for each of
the regions described above. Typically, the bar is set for
green
(safe) for
AL2
to
AL3,
yellow
(caution) for
AL1
to
AL2
or
AL3
to
AL4
and
red
(danger) for >
AL1
or <
AL4
.
T R I
B A M D
Press
ENTER/SAVE
Press ENTER/SAVE to store the new setting.
Color banding mode. The bar has a specific color in each of 5
different regions on the display. Typically, the bar is set for
green
(safe) for
AL2
to
AL3
,
yellow
(caution) for
AL1
to
AL2
or
AL3
to
AL4
and
red
(danger) for >
AL1
or <
AL4
.
Note:
When in Variation or Deviation mode (see Barform), 6
regions may be present due to the Zero point.
Note: These regions assume that
AL1
is
the highest and
AL4
the lowest
alarm setpoints. Setpoints may be
arranged in any order, however.
