Hughes HN9800, Руководство по установке

Страница: 12 / 66

Chapter 2 • Preparing for installation
12
1039707-0001 Revision A
•
Conduct a site survey.
•
Assemble and install the antenna and radio as instructed in the antenna
installation guide.
Installing the satellite modem
•
Connect the IFL cable.
•
Clear your cache of your Web browser.
•
Connect the modem to your laptop.
•
Connect the power supply.
•
Power up the modem and observe the LEDs to verify normal operation.
Commissioning the modem and pointing the antenna
•
Upload the sbc.cfg file (if you are instructed to upload it).
•
Enter the parameters.
•
Point the antenna.
•
Register the satellite modem.
Completing the installation
•
Confirm that all files are current
•
Confirm that the customer can connect to the Web.
Installation checklist
To help ensure a successful installation, pay careful attention to the items listed
below as you install the satellite modem, antenna, and the IFL cable.
IFL cables
For specific cable information see Table 2 on page 19.
•
Use only Hughes-approved cables.
•
Do not exceed maximum length for the outdoor unit (ODU) type, cable type, and
cable part number.
•
Do not exceed the cable bend radius.
•
Properly terminate cables.
Connectors and connections
Use only connector types approved for cable type used. Check all connections for
tightness.
Outdoors:
•
Make sure F connectors connected to the radio assembly are tightened to 20
inch-lb torque.
•
Carefully follow waterproofing procedures, using dielectric grease and
Hughes-approved weatherproof tape.