
Figure 18: Transmission Information page
The operational parameters listed on the Transmission Information page are shown in a tabular
format. The first (left) column identifies the parameter categories:
• Satellite Interface Statistics – Contains information on transmit status and signal strength,
as well as transmission-related error messages.
• Traffic Statistics: Transmit – Contains statistical information on the specific data transmitted
to the satellite from this satellite router.
Typical values for Transmission Information parameters
The following table lists typical values and the range of values for parameters on the Transmission
Information page. This information may help you understand the values displayed by your
satellite router.
To see the definition of any parameter, click the parameter name on the screen.
Table 9: Transmission Information parameters – typical values and range
Range of values
Typical values
Parameter
Satellite Interface Statistics (parameter category)
Up – The router is transmitting
signals to the satellite.
Down – The router is not
transmitting signals to the satellite.
Up
Transmit Status
Any whole number.
≥ 0
Tx Error
Not applicable (parameter reserved
for future use).
OK
Transmit Path Fault
Traffic Statistics: Transmit
Any whole number.
≥ 0
Total Satellite Packets Transmitted
Any whole number.
≥ 0
Total Satellite Packets Dropped
HN9500 Satellite Router User Guide
28
1037737-0001 Revision E
System Control Center
Chapter 2