background image

Before using the light for the first time you need to charge it for 8 hours. After that the 

battery should last charged for around 2 - 3 hours. 

Charge indicator light

Colorful small night lamp switch

USB 

power port

Plug other end of USB power cable into USB 

power  source  port.  You  can  also  charge  by 

power adapter (optional).

You can use the lamp while charging.
The  battery  will  be  fully  charged  after 

approximately 4-5 hours.

Power cable

Red light ON when battery is charging
Red light OFF when charging complete

Pressing the switch repeatedly cycles between the 

night lamp modes:

Level 1: Colorful small night lamp automatic cycle
Level 2: Dim red light
Level 3: Off

See ”Operating Instructions“ for setting 

the date / time / calendar.

The battery cell may move during transport of the lamp, and may 

lose contact. To eliminate play inside the battery holder, there is a 

small thin piece of foam between the battery and the cover to remo-

ve any excess free play.

Turn the battery cover CCW and remove it. Remove the battery cell 

from inside the lamp case. Note the cell direction.

The lamp is delivered with a sealed cell battery. Open the cover, re-

move the seal from the battery, and re-install the battery in the lamp.

In  order  to  use  the  lamp  properly,  please  change  the  battery  cell 
when the LCD screen does not display information anymore.

Install a new 3V battery cell in the same direction as the original 

cell. Reinstall the battery cover and turn it CW until it locks in 

place.

   

cl

os

e

Press the power switch repeatedly to turn on/off 

the lamp, and adjust the brightness (3 levels).

• To avoid damaging the lamp, do not over-extend the joints.

• To avoid electric shock, do not disassemble the lamp yourself.

• Do not use the lamp in or near rain or damp conditions.

• Keep the lamp away from flammable and/or humid surroundings.

• If there is a problem with the lamp, it should be checked and repaired by a professional         

   lamp repair person.

TIME

CALENDAR

DAY

TEMPERATURE

!

Input power: USB 5V/500mA

Lithium battery: 3.7V/600mAh

Battery cell for LCD: CR2032/3V

 

51mm

2“

90mm

3.54“

50mm

1.96“

1.96“

50mm

62mm

2.44“

91mm

3.6“

33.5mm

1.3“ 

Base can be removed from lamp body

   

op

en

243mm  9.5“

250mm

9.8“

important - first time charging

LcD DispLaY screen

Dimensions

specifications

power switch

coLorfuL night Lamp switch

instaLLing the batterY ceLL

charge methoD

Отзывы: