background image

17

 

 

Fully Assembled View

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Operating Your Grill 

         CAUTION 
Use only the regulator provided. If a replacement is necessary, call our customer service center. The use of 

unauthorized parts  can create an unsafe condition and environment. 

 

Use only the pressure regulator and hose assembly supplied with the outdoor cooking gas appliance must be 
used. The regulator  of the appliance shall comply with the relevant EN standard. Replacement pressure 

regulators and hose assembly must be those  specified by the outdoor cooking gas appliance manufacturer. Use 
LP or butane cylinders equipped with a cylinder  connection device compatible with the connection for outdoor 

cooking appliances. The cylinder must include a collar to protect  the cylinder valve. Do not drop or handle the 
cylinder roughly. If the appliance is not in use, disconnect the cylinder. Turn off the  cylinder first  if you need 

change it. 
Storage of the appliance indoors is permissible ONLY if the cylinder is disconnected and removed from the 
appliance. Store  cylinder outdoors and out of the reach of children. Do not store the cylinder in a building, 
garage or other enclosed areas. Never  store your cylinder where temperatures can reach over 51.6

/124.8°F. 

 

Before connecting, make sure there is no debris caught in the head of the gas cylinder, regulator valve or in the 

head of the  burner and burner ports. Connect regulator valve and hand tighten firmly. Disconnect the gas 
cylinder from the regulator valve  when the grill is not in use. DO NOT obstruct the flow of combustion air or 

ventilation air to the grill. Arrange the propane or  butane cylinder for vapor withdrawal and equipped with a listed 
overfill prevention device (OPD). 

 

This Appliance must be kept away from flammable materials during use. Do not contact with the surface when 
the support  temperature exceeds 50 K. 

 

 

Содержание 239418





























Отзывы: