Ver. 1.4
–
6-21
21
Configure Tracking Settings
.
Basic 1
________________
.
To adjust the
Tracking Parameters
of the selected camera, you must click the
Settings
button in the
tracking control area. Once opened, you’ll be greeted with the
Basic 1
parameters. From here, you have
control over
Video Format
,
Baud Rate
, Control
Protocol
,
Device Address
,
Position Correct
,
Face Height
,
Debug
mode,
Tracking Zones
,
Blocking Zones
&
Preset Zones
(beta). You can further tune the Preset
Zones with the
Senior 1
interface.
•
Video Format:
Resolution and frame rate of video output.
o
Options include: 720p60, 720p50, 1080i60, 1080i50, 1080p30, 1080p25, 1080p60,
1080p50
•
Baud Rate:
Baud rate for analog control
o
Options include: 9600bps
•
Protocols:
Control protocol for camera control
o
Options include: VISCA & PELCO_D
•
Device Address:
Analog device control address
o
Options include: 1, 2, 3, 4, 5, 6, & 7
•
Pos Correct:
Allows position correction of the camera head.
o
Use the PTZ control within Pos Correct to align the camera head and reference feed.
•
Face Height:
Adjust the height the camera tracks a face.
o
Default Value: 100. It allows you to adjust the height up or down in intervals of 10.
Range: 0
–
200.
•
Debug:
Displays Blue & Green boxes around tracked objects/individuals.
o
Green box: The green box displays tracked motion
o
Blue box: The blue box displays tracked faces