12
Configuring the Camera
To configure a camera, you will need to connect it to
the Device Management section using the
methods above. From there, select the camera you
wish to configure, then select “Remote
Configuration”.
Streaming
– The Streaming tab allows you to
adjust the camera’s Real Time Streaming Protocol
settings.
• Stream Type
– RTSP stream dropdown
• selector.
Ŝ
Options include: Main Stream, Sub
Stream, Stream 3, & Stream 4
• Resolution
– RTSP resolution.
Ŝ
Main Stream resolutions: 1080p, 720p,
704x480(D1), & 320x240(QVGA)
Ŝ
Sub Stream resolutions: 720p,
704x480(D1), & 320x240(QVGA)
Ŝ
Stream 3 resolutions: 720p, 704x480(D1),
& 320x240(QVGA)
Ŝ
Stream 4 resolutions: 704x480(D1) &
320x240(QVGA)
• Video Rate Typ
e – Adjust the video rate.
Ŝ
Options include: CBR & VBR
Ŝ
Max Rate (Kbps) – Adjust the RTSP
stream’s maximum bit rate
• Key Frame Interval
– Adjust the RTSP
stream’s I-Key Frame Interval
Ŝ
Options include: 1 ~ 120 (we recommend
setting this value to double the stream’s
frame rate)
• Video Coding Type
– Adjust the Video Coding
type.
Ŝ
Options include: H.264 & MJPEG
• Encode Level
– Adjust the level at which the
video is encoded.
Ŝ
Options include: Base, Main, & High
• Channels
– Adjust the audio channel of the
embedded audio.
Ŝ
Options include: Mono & Stereo
• Encode Type
– Adjust the Audio Encoding
type of the embedded audio.
Ŝ
Options include: AAC
• Sample Rate
– Adjust the audio sample rate of
the embedded audio.
Ŝ
Options include: 16KHz, 44.1KHz, &
48KHz
• Audio Rate
– Adjust the audio rate of the em-
bedded audio.
Ŝ
Options include: 1 ~ 16383
• Input Pin
– Adjust the embedded audio con-
nection type.
Ŝ
Options include: LineIn & MicIn
• Volume Slider
– Adjust the audio level of the
embedded audio.
Ŝ
Range: 0 ~ 100
Network
– The Network tab allows you to ad-
just the camera’s network settings.
• Network
– The Network tab allows you to ad-
just the camera’s network settings.
• Connect With
– Adjust the method of network
connection.
Ŝ
Options include: DHCP & Static IP
Note: While in DHCP, you can only adjust the
RTSP Port & App Port.
