Hubner C-FLEX, Руководство пользователя

Страница: 68 / 82

68 | 82
OWNERS MANUAL | C-FLEX | D0579-B DECEMBER 2019
Electrical Interfaces – AOM Driver
Interfaces Connector Function
Control input – AOM Driver DB 15, male 5V TTL Digital modulation input ,
24 V Power supply to AOM driver,
RF output connector (“RF out”) SMA female Modulation signal to laser head
RF modulation input (“Mod in”) SMA female Analogue modulation input
Electrical Interfaces – C-FLEX
Interface Location Connector
System Input power
C-FLEX Kycon KPJX-45, 4-pin
System Remote interlock connector
C-FLEX Molex pin 1 & 2
System Data port
C-FLEX USB-B
Digital modulation
C-FLEX SMA female (where available, per laser line)
Analog modulation
C-FLEX SMA female (where available, per laser line)
ON/OFF modulation
C-FLEX SMA female (where available, per laser line)
AOM Driver
C-FLEX SMA female (where available, per laser line)
Cobolt Laser Controller
C-FLEX 26 pin D-SUB Male
Cobolt Laser Controller Power
C-FLEX 4-Pin Molex
Cobolt Laser Controller I/O
C-FLEX 8-Pin Molex
Cobolt Laser Controller Data
C-FLEX USB-type mini B plug (cable)
Electrical Interfaces – Laser Controller
Interface Location Connector
Cobolt Laser
Laser Controller 26 pin D-SUB
Cobolt Laser Controller Power
Laser Controller Kycon KPJX-45, 4-pin
Cobolt Laser Controller I/O
Laser Controller USB-type mini B
Cobolt Laser Data (RS-232)
Laser Controller USB-type mini B
Cobolt Laser Controller I/O – Key Switch
Laser Controller 2 pin Molex
Cobolt Laser Controller I/O – Remote Interlock / 5V Direct
Laser Controller 4-pin Molex