Huberth RP207187-3, Руководство пользователя

Страница: 12 / 18

ELECTRIC RANDOM-ORBITAL
SANDER
EN
12
GUARANTEE
All tools manufactured by the Manufacturer guaranteed for 12 months from the date of purchase against fabrication and
material defects.
All tools must be used only with original accessories and spare parts: we refuse all responsibility for damages or accidents
caused by non-observance of this rule which will also cause the termination of the guarantee.
The guarantee will no longer be valid if the instructions contained in this booklet are not followed, if the tool is used for
purposes other than that for which it is intended, if it is dismantled, interfered with in any way or damaged due to neglect.
The guarantee will be made valid by filling-in the form on the inside back cover of this instruction booklet.
If the tool is found to be defective or malfunctions, it should be returned carriage free in one piece in its original packing
together with the guarantee certificate to the manufacturer or to one of the Assistance Centers listed in the appendix to this
booklet.
The guarantee does not automatically imply replacement of the tool.
The manufacturer reserves the right to make any technical or design modification to its products without prior notice.
The manufacturer is not liable for any print errors. This document voids and replaces previous ones.
CONFORMITY DECLARATION
We declared on our responsibility that the hand-held non-electric power tool, which is mentioned in the present operating
manual, conforms to the Essential Requirements of Safety of the following Directive:
2006/42/CE
Machinery
The tests have been carried out in accordance with following Standards:
EN ISO 12100-1: 2003 Safety of machinery. Basic concepts, general principles for design. Basic terminology, methodology.
EN ISO 12100-2: 2003 Safety of machinery. Basic concepts, general principles for design. Technical principles.
UNI EN 983: 2009 Safety of machinery. Safety requirements for fluid power systems and their components.
UNI EN ISO 14121-1: 2007 Safety of machinery. Risk assessment. Principles.
UNI EN ISO 3744:1997 Acoustics. Determination of sound power levels of noise sources.
UNI EN ISO 11203: 1997 Acoustics. Noise emitted by machinery and equipment.
UNI EN ISO 5349-1: 2004 Mechanical vibration. Measurement and evaluation of human exposure to hand-transmitted
vibration.
DISPOSAL (WEEE DIRECTIVE)
At the end of its useful life, the product, pursuant to European Directive 2002/96/CE (WEEE) + 2003/108/CE and its
implementation in national law, must not be released into the environment or thrown away as domestic waste, but must be
disposed of at authorized recycling centers (contact the relevant local authorities for a list of places where the product may be
disposed of according to the law). Disposing of the product correctly contributes to protecting human health and safeguarding
the environment.
Any illegitimate disposal of the product will be punishable by law.