18
Using the Baby Monitor
3.9 Camera Control
3.9.1 Add (pair) a camera
1. Tap the in the menu bar.
2. Tap ,
/
/
/
will appear.
3. Tap
/
/
/
to select the desired Camera location.
Note:
If a camera is currently paired with the Parent Unit, its camera
location (in dark grey colour) cannot be selected for a new registration.
4. Press and hold the
PAIR
button on the underside of the Baby Unit until
the Parent Unit finds the camera, beeps and
PAIR OK
appears on the
screen. The video from the camera will then appear.
Note:
A camera can only be registered to one Parent Unit at any one time.
3.9.2 View a camera
1. Tap the in the menu bar.
2. Tap ,
/
/
/
will appear.
3. Tap
/
/
/
to select the desired Camera.
3.9.3 Delete a camera
1. Tap the in the menu bar.
2. Tap ,
/
/
/
will appear.
3. Tap
/
/
/
to select the desired Camera and tap
Press to
delete
button to delete that registration.
Note:
You cannot delete the camera if there is only one registered camera in the
Parent Unit.
3.9.4 Scan cameras
This function is only available when you have more than 1 Baby Unit
(Camera).
1. Tap the in the menu bar.
2. Tap ,
/
/
/
will appear.
3.
The parent unit will scan between registered cameras stopping briefly
on each registered camera for approx. 12 seconds.