11
Getting Started
English
2.5 Registration (Pairing)
The Baby Monitor is pre-registered to your Parent Unit. You do not need to
register it again unless the Baby Unit loses its link with the Parent Unit.
To re-register your Baby Unit, or register a new Baby Unit, follow the
procedure below:
1. Tap the in the menu bar.
2. Tap , Camera
/
/
/
will appear.
3. Tap
/
/
/
to select the desired Camera number, the parent
unit will begin searching for a camera to pair to.
Note:
If a camera is currently paired with the Parent Unit, its camera
location (in dark grey colour) cannot be selected for a new registration.
4. Press and hold the
PAIR
button on the underside of the Baby Unit until
the Parent Unit finds the camera, beeps and
PAIR OK
appears on the
screen. The video from the camera will then appear.
Note
:
A camera can only be registered to one Parent Unit at any one time.
2.6 Installation of Cot mount
A cot mount with cable management is included which mounts directly to
most cots to allow better viewing. Assemble and install the cot mount using
the following steps.
• Join the 4 poles and the support base together as per diagrams below.
(Dia. 1a , 1b)
Dia. 1a
Dia. 1b