LIGHTVAULT
®
Lens Reflector LTV55/56 & LTV755/756
Installation Instructions
Revised
7
/
16
/10 ECN
100715008
Status 5 Part No. 95656
Tools Required
:
J
” Hex Socket Wrench
F
” Hex Socket Wrench
Phillips Screwdriver
K
" Open End Wrench
INSTRUCTIONS PERTAINING TO A RISK OF FIRE OR INJURY TO PERSONS
IMPORTANT SAFETY INSTRUCTIONS!
WARNING: Fixtures must be grounded in accordance with local codes or the National Electrical Code.
Failure to do so may result in serious personal injury. All work should be done by a qualified electrician.
Lighted lamp is HOT! Do not touch hot lens, guard, or enclosure.
MAINTENANCE: A regularly scheduled maintenance program must be established to keep fixtures clean. DO
NOT operate luminaires with missing or damaged lens.
KEEP THIS SHEET FOR FUTURE REFERENCE.
LENS FRAME / REFLECTOR INSTALLATION:
Make certain all electrical supply is
OFF before starting fixture installation.
LTV55
LTV56
LTV755
LTV756
IMPORTANT: Condensation inside the fixture is a common occurrence due to the expanding and condensing of the
trapped air inside the fixture as it is cycled on and off. When the lamp is energized during the evening hours, moisture
on the inside of lens will burn off as fixture heats up. It will reappear after power is shut off and the inside air condenses
during cooling. A large majority of this moisture can be avoided by following the installation guidelines as described in
the housing installation instructions. Always relamp fixture during low humidity periods. Before closing fixture, energize
the lamp for approximately five (5) minutes to dry air inside fixture. Remove desiccant from zip lock bag and place in
reflector compartment. Install lens and lens frame as described below.
1. Remove debris shield from
housing & discard. (Shield is
aluminum, please recycle)
!
2. Place dessicant package inside
housing before connecting quick
disconnect.
3. Connect housing quick-disconnect
to reflector assembly quick-
disconnect.
!
P.O. Box 60080
• 1655
5 East Gale Ave.
City of Industry, California 91716-0080
626/968-5666
•
FAX 626/330-3861
