manualshive.com logo in svg

Hubbell GAI-Tronics 10370-701, Руководство пользователя, Страница: 14 / 16

Поделиться
Скачать
Hubbell GAI-Tronics 10370-701 Скачать руководство пользователя страница 14

Pub. 42004-463C 

VoIP Speaker Amplifier Interface 

Page 12 of 13 

P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-463C.docx 

03/20 

Service

 

Contact a regional service center for an RA# (return authorization number) if the equipment requires 
service.  Equipment must be shipped prepaid to GAI-Tronics with an RA# and a purchase order number.  
Repairs or a replacement will be made in accordance with GAI-Tronics’ warranty policy if the equipment 
is under warranty.  Please include a written explanation of all defects to assist our technicians in their 
troubleshooting efforts.  Call 800-492-1212 inside the USA or 610-777-1374 outside the USA for help 
identifying the nearest regional service center. 

Reference Documentation

 

VoIP Basic Configuration Guide ................................................................................................... 42004-548 

VoIP Firmware Programming Guide .................................................................................. 502-20-0171-001 

Specifications

 

Electrical 

Power 

AC

: 

Input voltage .......................................................................................................... 120/240 V ac, 50/60 Hz 

Input current .................................................................................... 0.35 A @ 120 V ac, 0.2 A @ 240 V ac 

PoE

 

Power ............................................................................................................. 802.3af compliant (via RJ45) 

Audio Output 

Speaker output power: 

With PoE ............................................................................................................. 8 W into 8-Ω load, or 

With 120/240 V ac input ................................................................................... 30 W into 8-Ω load, or 

Line out (into 600 ohms) .................................................................................................................1.0 V 

RMS

 

Frequency response ................................................................................................................. 300–3000 Hz 

Network (Ethernet) 

Signaling ....................................................................................... SIP (RFC3261 compliant) loose routing 

Addressing .................................................. static IP provisioning or DHCP STUN client (NAT traversal) 

Configuration ............................................................................................................. embedded web server 

 ......................................................................................................................... configuration file download 

 ................................................................................................... SNTP with time zone and daylight saving 

 ....................................................................................................................... automatic updating via TFTP 

 ..................................................................................................................................... password protection 

Control Outputs 

Output 1 (isolated solid-state switch) ................................................. 50 mA @ 30 V ac/dc (resistive load) 

Output 2 (isolated SPST relay) ............................................................. 10 A @ 30 V ac/dc (resistive load) 

Mechanical 

Physical dimensions ............................................... 13.00 H × 9.25 W × 4.00 D in; (330 × 235 × 102 mm) 

Enclosure material ......................................................................... high-impact, glass-reinforced polyester 

Connections...................................................................................... four drill spots for location of conduit 

Содержание GAI-Tronics 10370-701

















Отзывы:

Нет отзывов