A96473
EPA-T
7/27/2010
INSTALLATION INSTRUCTIONS
CATALOG NUMBER
PART NO.
APPRVD
DATE
DATE
REV.
16555 East Gale Avenue
City of Industry, CA 91745
(626)968-5666
50W MAXIMUM.
NOTE:
BY OTHERS
MR16 LAMP
(3) S/S SET SCREW
THE MAIN POWER SUPPLY LEADS
AUXILIARY POWER SUPPLY AND PASS
SCREWS. REMOVE HATCH.
4. LOOSEN (2) HATCH MOUNTING
BUT DO NOT TIGHTEN YET.
ORDER TO ADJUST THE HORIZONTAL
ADAPTER ON POLE TOP IN
8. ROTATE EGRESS POST TOP
(2) HATCH MOUNTING SCREWS.
POST TOP ADAPTER AND TIGHTEN
SET SCREWS TO SECURE ADAPTER.
LAMP POSITION. TIGHTEN (3) S/S
7. REPLACE HATCH ON THE EGRESS
TIGHTEN (1) THUMB SCREW.
POSITION TO THE DESIRED LOCATION.
ADJUST THE VERTICAL LAMP
6. LOOSEN (1) THUMB SCREW AND
GROUNDING WIRE
THUMB SCREW
GROUNDING
EGRESS TENON
ADAPTER WIRE WAY
1. TURN OFF ALL POWER.
SCREWS
(2) HATCH MOUNTING
HATCH
4" O.D. POLE (REF)
LAMP PROVIDED BY OTHERS.
5. INSTALL (1) MR16 (50 WATT MAX)
EGRESS TENON. (BY OTHERS)
AND SECURE THE FIXTURE TO THE
FIXTURE OVER THE EGRESS TENON
TOP FIXTURE. PLACE THE POST TOP
MAIN POWER SUPPLY TO THE POST
EGRESS POST TOP ADAPTER TO THE
2. CONNECT THE LEADS FROM THE
INSTALLATION INSTRUCTIONS:
ADAPTER ON THE POLE TOP
3. PLACE THE EGRESS POST TOP
THROUGH THE ADAPTER WIREWAY.
9. CONNECT THE LEADS FROM THE
