7
5. Sample related parameters: sample temperature and hot bath temperature
6. Atmospheric pressure and temperature in the cabinet
Component control
Under the main interface, the control of components can be divided into cooling fan,
mechanism lifting, fire sweeping once and ignition.
Manual start or stop of cooling fan: press the cooling fan to start and then press the
cooling fan to turn off.
Mechanism lifting: manually control the lifting of control mechanism. Press once to
change to raise or fall. Please pay attention to whether to operate
Damage to other parts, confirm it is correct before operation
Fire sweep once: Click to sweep fire once.
Ignition: click the first time to warm up, the second time is ignition, and the third time is
to turn off ignition.
Interface switching
In the main interface, click the system setting, method setting, historical data, equipment
detection, instrument calibration, debugging and analysis interface to divide
Do not switch to the interface of system setting, method setting, historical data, analysis
interface, equipment detection, instrument calibration, instrument debugging
Sample related parameters
The relevant parameters of the instrument are shown in the main interface as shown
in the following figure:
Case temperature: temperature value in the chassis
Air pressure: current atmospheric pressure value
Sample temperature: the temperature of the sensitive area of the sample
