14
X.Install Printer Paper
1, installation on paper and paper and turn the printer front cover, and hold a fixed head
on either side of the machine head plate elastic card, pull pull the nose plate is about 2
mm, turn on the printer power and printer paper after three lines, enter the standby
state, the indicator lights. Click on the button, indicator light out, and then hold down
the button more than one second, printer paper began to walk; Or hold down the button
directly more than 1 second, printer paper began to walk. After the front end of the
printing paper cut into triangles, printing paper into the printer back into paper, printing
paper will be involved in printer. Typed to stay out of the printer head above the mouth
out of a paper, click on the button to stop the feeding, automatic into the indicator on
standby. Hold hold elastic shaft at both ends of the paper, the elastic paper roll on the
shaft can be installed to the paper shaft frame.
2, detection, and the printer power off, hold the SEL button to switch the printer on,
after the printer into the self-test, print out the self-checking list.
Customers can according to need to matching JA2003N electronic balance (0.001 g).