⑥
Waveform amplitude adjustment knob when sampling
⑦
Printer
II. External Wiring
1. Wiring of low-voltage pulse method:
The dedicated signal cable:
Connect "Q output terminal" and "Q input terminal" on one side;
Connect the red clip with cable core wire, and the black clip with cable shield
ground or another phase on the other side.
2. Wiring of high-voltage method:
Connect signal test line on "Cable Fault Location System" control panel and pulse
reflect meter (TDR) corresponding to the signal port. Enter the corresponding input
and output.
Better use its own battery for "HZ-4000 Cable Fault Tester" When performing
high-voltage method test.
