10
5
An explanation of the selected function.
The "DC resistance test results" screen is shown below.
No.
Instruction
1
Measured resistance values
2
The test temperature of the phase winding is measured
3
Temperature values needed to be converted to
4
Winding material
No.
Instruction
5
Resistance after temperature conversion
6
Menu selection area.
Press the “←”→” button to move the cursor to select the appropriate
function, press the "Enter" button to execute the currently selected function,
and press the "Cancel" button to return to the previous screen.
Retest according to the current settings parameters.
Print the current test results by connecting the external printer.
Save the current test results to the local computer or save it to the external
USB disk.
Tip: the data saved to the USB is in WORD format, and can be directly
edited or printed with OFFICE.
XI.Matters Needing Attention
When testing the no-load tap-changer winding, it is not allowed to switch off the
no-load tap-changer during the testing process or when the power is not fully
discharged.
It is not allowed to dismantle the test line and cut off the power switch during the test
or discharge process.
