HUAYUAN SLG-200HF, Инструкция по эксплуатации, Страница: 9 / 53

2
3. Features
1) Rated duty cycle 100%
（
40
℃） ，
suitable for heavy industry
。
2) With analogue and digital signal connector, special used for automatic cutting equipment, like CNC and robot.
3) Separate arc initiator and power source, with short torch cable and small interruption for automatic equipment,
short gas circuit,fast reaction, stable gas flow, high arc strike success and good cutting quality
4) Separate adjust plasma gas and shield gas pressure, suitable for many gas cutting procedure, especially suitable for
O
2
plasma gas/Air shield gas. Compare with normal plasma cutting, this machine can get better carbon steel
cutting quality and efficiency
5) Professional torch cooling system, with import big flow pump and big power heat sink construction, so that torch
work stable and constant
6) Gas pre send/gas delay shut/current up slope time can be set
7) Machine have overheat/gas pressure lack/coolant capacity and flow lack/voltage lack/over voltage and lack phase
protection
8) With torch monitoring function, with alarm warning, can remind consumables replace to improve the torch life
4. Usage
It’s used for cutting carbon steel, alloy steel, nonferrous metals and so on.
It is suitable for pressure vessel, chemical vessel, industry electric power installation, chemical construction, aeroplane
industry, vehicle manufacturing, etc.
5. Symbol Instruction
POWER ON POWER OFF
PRESS OUT, POWER ONE PRESS IN, POWER OFF
DANGER VOLTAGE INPUT
FUSE CURRENT OUTPUT
OVER HEAT GAS INPU
PLASMA GAS SHIELD GAS
COOLANT LEVEL COOLANT FLOW
COOLANT INPUT COOLANT OUTPUT