CODE
SEVERITY
2
Critical (CRIT): The system condition is critical.
3
Error (ERROR): There is an error condition on the system.
4
Warning (WARNING): There is a warning condition on the system.
5
Notice (NOTICE): There is a normal but significant condition on the system.
6
Informational (INFO): The syslog contains an informational message.
7
Debug (DEBUG): The message is intended for debug-level purposes.
NOTE
The LTE device supports sending ERROR, INFO, and DEBUG severity level logs.
17.2 The System Log Screen
Click
System Monitor > Log
to open the
System Log
screen. Use the
System Log
screen to
see the system logs for the categories that you select in the upper left drop-down list box.
Figure 17-1
System Monitor > Log > System Log
The following table describes the fields in this screen.
Table 17-2
System Monitor > Log > System Log
Label
Description
Select the type of the logs that you want to search in the first drop-down list box.
(Types: All Logs, WAN-DHCP, System Maintenance, Remote Management, TR-069, NTP,
ETHER, DDNS, NAT, Attack, ACL, LTE)
Level
Select a severity level from this drop-down list box. This filters search
results according to the severity level you have selected. When you
select a severity, the LTE Device searches through all logs of that
severity or higher. See
for more information about severity
levels.
Refresh
Click this to renew the log screen.
Clear Logs
Click this to delete all the logs.
LTE CPE B2368
User Guide
17 Logs
Issue 03 (2019-01-31)
Copyright © Huawei Technologies Co., Ltd.
136
