Huawei UAP2105 Скачать руководство пользователя страница 22

Страница: 22 / 55

Item

Specification

Service
capabilities

Common PS and CS services:

A maximum of four concurrent AMR services is supported.

A maximum of four concurrent VP services is supported.

A maximum of eight concurrent PS services is supported.

A maximum of four concurrent R99 384 kbit/s PS services is
supported.

A maximum of four concurrent CS users is supported.

A maximum of four concurrent PS users is supported.

HSDPA service:

The maximum supported HSDPA rate is 3.6 Mbit/s or 7.2 Mbit/s. The
default value is 3.6 Mbit/s. The license can be used to control the
maximum HSDPA rate of the UAP2105.

3GPP R99, R4, R5, and R6 services can be provided at the same time.

A maximum of four concurrent HSDPA users is supported.

A maximum of 10 HS-PDSCH codes is supported.

HSUPA service

The maximum supported HSUPA rate is 1.44 Mbit/s.

3GPP R99, R4, R5, and R6 services can be provided at the same time.

A maximum of four concurrent HSUPA users is supported.

The 10 ms Transmission Time Interval (TTI) over the E-DCH is
supported.

Transmit and
receive diversity

No transmit diversity or receive diversity

Receiver
sensitivity

-110 dBm

Clock precision

±0.1 ppm

3.4.2 Technical Specifications of the UAP2105

This describes the technical specifications of the UAP2105.

Technical Specifications

Table 3-4

Technical specifications of the UAP2105

Item

Specification

Dimensions (Height x Width x Depth)

33 mm x 125 mm x 125 mm

Weight

0.4 kg

3 Introduction to the UAP2105

UAP2105

User Guide

3-6

Huawei Proprietary and Confidential

Issue 03 (2009-08-20)

Содержание UAP2105
























































Результаты поиска

Содержание UAP2105

Отзывы:

Huawei UAP2105, Руководство пользователя, Страница: 22 / 55

Результаты поиска

Содержание UAP2105

Отзывы: