Huawei TaiShan 2280 V2 Скачать руководство пользователя страница 150

Страница: 150 / 177

Item

Specifications

Security

Administrator password

(Optional) Front bezel

NOTE

The front bezel is installed on the front panel and comes with a security lock to
prevent unauthorized operations on drives.

Graphics card

The mainboard integrates an SM750 graphics card, providing 32 MB
memory and supporting a maximum resolution of 1920 x 1200 at 60 Hz
with 16 M colors.

NOTE

The maximum resolution 1920 x 1200 is supported only after the video card
driver that corresponds to the server OS version is installed. Otherwise, only
the default resolution of the OS is supported.

If both the front and rear VGA ports are connected to monitors, only the
monitor connected to the front VGA port is available.

13.2 Environmental Specifications

Table 13-2

Environmental specifications

Category

Specifications

Temperature

Operating temperature: 5°C to 40°C (41°F to 104°F)
(ASHRAE Classes A2 and A3 compliant)

Storage temperature:

–

40°C to +65°C (

–

40°F to +149°F)

Long-term storage temperature: 21°C to 27°C (69.8°F to
80.6°F)

Maximum temperature change rate: 20°C/h (36°F/h)

NOTE

The highest operating temperature varies depending on the
configuration. For details, see

Table 13-3

Relative humidity (RH,
non-condensing)

Operating humidity: 8% to 90%

Storage humidity: 5% to 95%

Long-term storage humidity: 30% to 69%

Maximum change rate: 20%/h

Air volume

≥ 204 cubic feet per minute (CFM)

TaiShan 2280 V2 Server
User Guide

13 Product Specifications

Issue 01 (2019-07-01)

142

Содержание TaiShan 2280 V2


















































































































































































Результаты поиска

Содержание TaiShan 2280 V2

Отзывы:

Бренды по названию

Популярные бренды

Huawei TaiShan 2280 V2, Руководство пользователя

Результаты поиска

Содержание TaiShan 2280 V2

Отзывы:

Бренды по названию

Популярные бренды