manualshive.com logo in svg

Huawei TaiShan 2280 V2, Руководство пользователя

Поделиться
Скачать
Huawei TaiShan 2280 V2 Скачать руководство пользователя страница 109

l

ECC

l

SEC/DED

l

SDDC

l

Patrol scrubbing

5.8.6 DIMM Installation Rules

l

General DIMM Installation Rules

–

Install DIMMs only when the corresponding CPU is installed.

–

Do not install LRDIMMs and RDIMMs on the same server.

–

5.8.2 Memory Subsystem Architecture

 provides the DIMM installation sequence.

–

When installing DIMMs in a memory channel, install DIMMs with more ranks and
then DIMMs with fewer ranks (starting from the slot farthest from the CPU in the
channel). For example, install quad-rank DIMMs, then dual-rank DIMMs, and then
sing-rank DIMMs.

–

Install DIMM fillers in vacant DIMM slots.

l

DIMM Installation Rules for Specific Modes

–

Installation Rules for the Memory Sparing Mode

n

Follow the general DIMM installation rules.

n

The spare configuration of each channel must be valid.

n

Different channels can have different spare configurations.

n

Each channel with DIMMs installed must have a spare rank.

–

Installation Rules for the Memory Mirroring Mode

n

Follow the general DIMM installation rules.

n

Install DIMMs in either channels 1 and 2, or channels 3 and 4. The installed
DIMMs must be of the same size and organization.

n

For a multi-CPU configuration, each CPU must have a valid memory
mirroring configuration.

–

Installation Rules for the Memory Patrol Mode
See the general DIMM installation rule.

5.8.7 Installing a DIMM

Step 1

Wear an ESD wrist strap. For details, see 

12 Preventing Electrostatic Discharge

.

Step 2

Power off the server. For details, see 

3.2 Powering Off the Server

.

Step 3

Remove the power cables. For details, see 

3.4 Removing Cables from a PSU

.

Step 4

Remove the server. For details, see 

3.3 Removing the Server and Guide Rails

.

Step 5

Remove the chassis cover. For details, see 

3.6 Removing the Chassis Cover

.

Step 6

Remove the air duct. For details, see 

3.10 Removing the Air Duct

.

Step 7

Take a spare DIMM out of the DIMM box.

Step 8

Open the two fixing clips of the DIMM slot. See 

Figure 5-18

.

TaiShan 2280 V2 Server
User Guide

5 Optional Part Installation

Issue 01 (2019-07-01)

Copyright © Huawei Technologies Co., Ltd.

101

Содержание TaiShan 2280 V2


















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды