Huawei SUN2000-10KTLM1 Скачать руководство пользователя страница 8

Страница: 8 / 124

Safety Information

1.1 General Safety

Statement

Before installing, operating, and maintaining the equipment, read this document

and observe all the safety instructions on the equipment and in this document.
The "NOTICE", "CAUTION", "WARNING", and "DANGER" statements in this

document do not cover all the safety instructions. They are only supplements to

the safety instructions. Huawei will not be liable for any consequence caused by

the violation of general safety requirements or design, production, and usage

safety standards.
Ensure that the equipment is used in environments that meet its design

specifications. Otherwise, the equipment may become faulty, and the resulting

equipment malfunction, component damage, personal injuries, or property

damage are not covered under the warranty.
Follow local laws and regulations when installing, operating, or maintaining the

equipment. The safety instructions in this document are only supplements to local

laws and regulations.
Huawei will not be liable for any consequences of the following circumstances:
●

Operation beyond the conditions specified in this document

●

Installation or use in environments which are not specified in relevant

international or national standards

●

Unauthorized modifications to the product or software code or removal of the

product

●

Failure to follow the operation instructions and safety precautions on the

product and in this document

●

Equipment damage due to force majeure, such as earthquakes, fire, and

storms

●

Damage caused during transportation by the customer

●

Storage conditions that do not meet the requirements specified in this

document

SUN2000-(3KTL-10KTL)-M1

User Manual

1 Safety Information

Issue 02 (2020-11-20)

Содержание SUN2000-10KTLM1





























































































































Результаты поиска

Содержание SUN2000-10KTLM1

Отзывы:

Похожие инструкции для SUN2000-10KTLM1

Бренды по названию

Популярные бренды

Huawei SUN2000-10KTLM1, Руководство пользователя

Результаты поиска

Содержание SUN2000-10KTLM1

Отзывы:

Похожие инструкции для SUN2000-10KTLM1

Бренды по названию

Популярные бренды