manualshive.com logo in svg

Huawei SmartLogger3000, Руководство пользователя, Страница: 278 / 305

Поделиться
Скачать
Huawei SmartLogger3000 Скачать руководство пользователя страница 278

NO TE

Do not decompress the upgrade package.

Step 2 Connect the USB flash drive to the USB port on the SmartLogger.
Step 3 Log in to the app as installer, choose More > Upgrade, select a single device or

multiple devices of the same type, and tap Next.

Step 4 Select the upgrade package and tap Next.
Step 5 Confirm the upgrade package and the device to be upgraded, and tap Finish to

start upgrading the device.

NO TE

After the upgrade is complete, the device automatically restarts.

Step 6 After the upgrade is complete, remove the USB flash drive.

----End

8.8 How Do I Change a Device Name?

Procedure

Step 1 Choose Maintenance > Device Mgmt > Device List.
Step 2 Modify the device name based on the actual situation, select the modified entry,

and click Modify Device Info.

NO TE

You can also export device information to a .csv file, modify the file, and import the modified

file to modify device information.

----End

8.9 How Do I Change the Communications Address?

The SmartLogger allows you to change the communications addresses of Huawei

devices on the Connect Device or Device List page.

Changing the Communications Address on the Connect Device Page

Step 1 Choose Maintenance > Device Mgmt. > Connect Device.
Step 2 Click Auto Assign Address, set the start address for assignment, and confirm the

address assignment.

Step 3 Confirm the address adjustment, adjust the device address as required, and click

Address Adjustment.

Step 4 Confirm to search for the device again.
Step 5 After the search is complete, click Close.

----End

SmartLogger3000

User Manual

8 FAQ

Issue 10 (2022-08-20)

Copyright © Huawei Technologies Co., Ltd.

266

Содержание SmartLogger3000


















































































































































































































































































































Отзывы:

Нет отзывов