Huawei SmartLogger3000 Скачать руководство пользователя страница 260 | Manualshive

Страница: 260 / 305

Huawei SmartLogger3000 Скачать руководство пользователя страница 260

Tab

Function

Operation Description

Inspection

Check the health

status of the

inverter.

1. If Single Inspection is selected, select the

device to be inspected. If Batch

Inspection is selected, you do not need to

select a device.

2. Set Inspection type.
3. Click Start Inspection.
4. Observe the progress bar and wait until

the inspection is complete.

5. After the inspection is successful, click Log

archiving to download the inspection log.

Spot-check Start a spot-check.

NOTE

The spot-check

function is available

only for a device

whose grid code is

set to the Japanese

standard.

1. Select the device to be spot-checked.
2. Click Start Spot-Check.
3. Perform a spot-check test onsite.
4. After the spot-check test is complete, click

Stop Spot-Check.

Alarm Test Simulates an

inverter alarm.

NOTE

Only the

SUN2000-63KTL-

JPH0,

SUN2000-50KTL/

63KTL-JPM0, and

SUN2000-125KTL-

JPH0 support the

alarm test function.

1. Choose Device model > Device name to

select the device for which the alarm test

is to be performed.

2. Click an alarm name to deliver an alarm

command. The alarm icon is green by

default and turns red after the command

is delivered.

3. Click Clear Alarm to clear all alarms of

the SUN2000-63KTL-JPH0,

SUN2000-50KTL/63KTL-JPM0, and

SUN2000-125KTL-JPH0.

NOTE

After the alarm is cleared, the SmartLogger

collects alarm data again.

----End

7.4.6 Managing Licenses

Context

●

The smart I-V curve diagnosis, smart PV string monitoring, smart tracking

algorithm, and smart reactive power compensation functions can be used

only after a license is purchased.

●

The license files for smart I-V curve diagnosis and smart PV string monitoring

need to be stored in the solar inverter, and the license files for smart tracking

algorithm and smart reactive power compensation need to be stored in the

SmartLogger. The matching between the SN of a device and a license is

unique.

SmartLogger3000

User Manual

7 Device Maintenance

Issue 10 (2022-08-20)

Copyright © Huawei Technologies Co., Ltd.

248

«
...
258
259
260
261
262
...
»

Содержание SmartLogger3000


















































































































































































































































































































Отзывы:

Нет отзывов