Huawei SmartLogger2000 series Скачать руководство пользователя страница 41 | Manualshive

Страница: 41 / 230

Huawei SmartLogger2000 series Скачать руководство пользователя страница 41

SmartLogger2000
User Manual

3 Device Installation

Issue 04 (2018-04-10)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

31

3

Device Installation

3.1 Precautions

Install the SmartLogger in an appropriate position and on a suitable surface.



Do not install the SmartLogger in areas with flammable or explosive materials.



Do not install the SmartLogger on flammable building materials.

3.2 Checking Before Installation

Checking the Outer Packing

Before unpacking the SmartLogger, check the outer packing for damage, such as holes and
cracks. If any damage is found, do not unpack the SmartLogger and contact the dealer
immediately.

Checking the Product and Accessories

After unpacking the SmartLogger, check that the product and accessories are intact and
complete, and free from any obvious damage. Contact the dealer if any damage is found or
any component is missing.

For details about the number of accessories delivered with the SmartLogger, see the

Packing List

in the

packing case.

«
...
39
40
41
42
43
...
»

Содержание SmartLogger2000 series







































































































































































































































Отзывы:

Нет отзывов