Huawei SmartLogger2000 series Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 230

Huawei SmartLogger2000 series Скачать руководство пользователя страница 3

SmartLogger2000
User Manual

About This Document

Issue 04 (2018-04-10)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

ii

About This Document

Overview

This document introduces the SmartLogger2000 (

SmartLogger

for short) in terms of

installation, electrical connections, system operation, maintenance, and troubleshooting. You
should understand the SmartLogger features, functions, and safety precautions provided in
this document before installing and operating the SmartLogger.

The figures provided in this document are for reference only. The actual product appearance
prevails.

You can print the document. Store the paper copies properly for future use.

Intended Audience

This document is intended for photovoltaic (PV) plant operators and qualified electrical
technical personnel.

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not
avoided, could result in equipment damage, data loss,
performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal
injury.

«
1
2
3
4
5
...
»

Содержание SmartLogger2000 series







































































































































































































































Отзывы:

Нет отзывов