In this example, the default digitmap profile, namely digitmap profile 1 is used.
Step 6
Configure an IP address for an ONU SIP user.
For ONU 1, configure the IP address obtaining mode to the DHCP mode, set the management
VLAN to VLAN 20, and use default values for other parameters.
huawei(config)#
interface gpon 0/1
huawei(config-if-gpon-0/1)#
ont ipconfig 0 1 dhcp vlan 20
Step 7
Configure SIP POTS users.
1.
Add an SIP interface and apply an SIP agent profile to the interface.
For ONU 1, set the MG ID to 1, apply SIP agent profile 2 to ONU 1, and use default values
for other parameters.
If parameters in an SIP agent profile are changed, the SIP agent profile must be reapplied
to the ONU so that the changed parameters can take effect.
huawei(config-if-gpon-0/1)#
if-sip add 0 1 1 sipagent-profile profile-id 2
2.
Add POTS users.
For ONU 1, set the MG ID to 1 (identical to the MG ID of the added SIP interface), create
two POTS users named huawei1, set passwords to user1 and user2, set their phone numbers
to 77730010 and 77730020 and use default values for other parameters.
huawei(config-if-gpon-0/1)#
sippstnuser add 0 1 1 mgid 1 username huawei1 telno
77730010
huawei(config-if-gpon-0/1)#
sippstnuser add 0 2 1 mgid 1 username huawei2 telno
77730020
Run the
display sippstnuser attribute
command to check whether the configuration of
the POTS user is properly set.
huawei(config-if-gpon-0/1)#
display sippstnuser attribute 0 1 1
------------------------------------------------------------------------------
F/S/P : 0/1/0
ONT ID : 1
Port ID : 1
MG ID : 1
Telephone NO. : 77730010
User name : huawei1
Password : user1
...//The rest of the response information is omitted.
huawei(config-if-gpon-0/1)#
display sippstnuser attribute 0 1 2
------------------------------------------------------------------------------
F/S/P : 0/1/0
ONT ID : 1
Port ID : 2
MG ID : 1
Telephone NO. : 77730020
User name : huawei2
Password : user2
...//The rest of the response information is omitted.
Step 8
Apply and bind an ONU voice service profile to an SIP interface
Currently, the interface common profile, SIP agent profile, SIP service data profile, and POTS
port profile can be applied to an SIP interface, and the digitmap profile can be bound to an SIP
interface.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
10 FTTD Configuration
Issue 01 (2014-04-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
768
