RMS-SNMP01B SNMP Card
User Manual
4 Managing the UPS on the WebUI
Issue 10 (2020-03-20)
Copyright © Huawei Technologies Co., Ltd.
39
Figure 4-42
Buttons after one event is expanded
Table 4-7
Buttons after one event is expanded
No.
Name
Description
1
Button for modifying
A dialog box for modifying a job is
displayed after you click this button. You can
modify the job.
2
Button for deleting one
job
You can delete the job by clicking this
button.
3
Button for test
If you click this button, the job will be
performed and a message showing test
succeeds or fails will be displayed on the
page.
Adding one job for one event: Select one event (for example,
Inverter on
), click the button
for adding one job, and the page for adding a job for the event is displayed.
When adding a job, the job types to be selected are:
RCCMD Shutdown
,
RCCMD Message
,
RCCMD Execute
, and
RCCMD TRAP
.
RCCMD Shutdown
is selected by default. For
different job types, you need to enter different contents.
RCCMD Shutdown
: You need to specify the RCCMD client IP address and port. When
the RCCMD client receives the job, it will shut down the terminal which is installed with
the RCCMD software.
