Huawei R100020G1 Скачать руководство пользователя страница 7

Страница: 7 / 53

Safety Precautions

General Safety

●

Before installing, operating, or maintaining the company's equipment, read

through this manual and follow all the safety instructions.

●

When installing, operating, and maintaining the equipment, observe all the

safety instructions on the equipment and in this document to prevent

personal injury and equipment damage.

●

The "DANGER", "WARNING", and "CAUTION" statements in this document do

not cover all the safety instructions. They are only supplements to the safety

instructions.

●

Ensure that the equipment is used in environments that meet its design

specifications. Otherwise, the equipment may become faulty, and the

resulting equipment malfunction, component damage, personal injury, or

property damage will not be covered under the warranty.

●

Follow all the safety precautions and instructions provided by the company.

The safety precautions given in this document do not cover all safety

precautions. The company will not be liable for any consequence caused by

violation of the safety operation regulations and design, production, and

usage standards.

Declaration

The company will not be liable for any consequences in any of the following

circumstances:

●

Damage during transportation

●

No barcode or incomplete barcode within the warranty period

●

Storage conditions that do not meet the requirements specified in this

document

●

Incorrect storage, installation, or use

●

Installation or use by unqualified personnel

●

Failure to follow the operation instructions and safety precautions on the

product and in this document

●

Operation beyond the conditions specified in this document

R100020G1 Charging Module

User Manual

1 Safety Precautions

Содержание R100020G1






















































Результаты поиска

Содержание R100020G1

Отзывы:

Huawei R100020G1, Руководство пользователя, Страница: 7 / 53

Результаты поиска

Содержание R100020G1

Отзывы: