
Context
Do as follows on the switch with the NQA MTrace test instance being created:
Procedure
Step 1
Run:
system-view
The system view is displayed.
Step 2
Run:
nqa
test-instance
admin-name
test-name
The test instance view is displayed.
Step 3
Run:
mtrace-source-address
ipv4
ip-address
The address of the multicast source is specified.
Step 4
(Optional)The VPN instance is specified.
vpn-instance
vpn-instance-name
Step 5
Run:
quit
Exit from the test instance view.
----End
6.21.4 (Optional) Adjusting the Performance of the NQA MTrace
Test
This part describes how to set optional MTrace test parameters according to the network
operating status.
Context
Do as follows on the switch with the MTrace test being configured:
NOTE
The steps described in this procedure are all optional.
Procedure
Step 1
Run:
system-view
The system view is displayed.
Step 2
Run:
nqa
test-instance
admin-name
test-name
The test instance view is displayed.
Step 3
Run:
6 NQA Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
6-74
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2010-09-20)