Huawei Quidway S5600 Скачать руководство пользователя страница 928

Страница: 928 / 991

Operation Manual – Information Center
Quidway S5600 Series Ethernet Switches-Release 1510

Chapter 1 Information Center

Huawei Technologies Proprietary

1-16

# mkdir /var/log/Quidway

# touch /var/log/Quidway/information

Step 2: Edit the file “/etc/syslog.conf” as the superuser (root user) to add the following

selector/action pair.

# Quidway configuration messages

local4.info /var/log/Quidway/information

Note:

When you edit the file “/etc/syslog.conf”, note that:

A note must start in a new line following a “#” sign.

In each pair, a tab should be used as a separator instead of a space.

No space is allowed at the end of a file name.

The facility and received log information severity level specified in the file

“/etc/syslog.conf” must be the same as those corresponding parameters configured

in the commands

info-center loghost

and

info-center source

. Otherwise, log

information may not be output to the log host normally.

Step 3: After the log file “information” is created and the file “/etc/syslog.conf” is

modified, run the following command to send a HUP signal to the system daemon

“syslogd”, so that it reads its new configuration file “/etc/syslog.conf”.

# ps -ae | grep syslogd

147

# kill -HUP 147

After all the above operations, the switch can make records in the corresponding log

file.

Note:

Through combined configuration of the device name (facility), information severity level

threshold (severity), module name (filter) and file “syslog.conf”, you can sort

information precisely for filtering.

1.4.2 Log Output to a Linux Log Host

I. Network requirements

The switch sends the following log information in English to the Linux log host whose IP

address is 202.38.1.10: All modules' log information, with severity higher than “errors”.

Содержание Quidway S5600
































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Quidway S5600

Отзывы:

Бренды по названию

Популярные бренды

Huawei Quidway S5600, Руководство по эксплуатации

Результаты поиска

Содержание Quidway S5600

Отзывы:

Бренды по названию

Популярные бренды