Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-46
undo ospf timer poll
View
Interface view
Parameter
seconds
: Poll Hello interval in seconds. It ranges from 1 to 65535 and defaults to 40.
Description
Use the
ospf timer poll
command to configure the poll Hello packet interval on NBMA
and
p2mp
network.
Use the
undo ospf timer poll
command to restore the default poll interval.
On an NBMA or
p2mp
network, if a neighbor becomes invalid, Hello packet will be
transmitted at the interval of
poll
seconds
. You can configure the
poll
seconds
to
specify how often the interface transmits Hello packet before it establishes adjacency
with the adjacent router. Poll seconds should be no less than 3 times of Hello.
Example
# Configure to transmit poll Hello packet through interface Vlan-interface 20 every 130
seconds.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface Vlan-interface 20
[Quidway-Vlan-interface20] ospf timer poll 130
3.1.43 ospf timer retransmit
Syntax
ospf timer retransmit
interval
undo ospf timer retransmit
View
Interface view
Parameter
interval:
Interval, in seconds, for retransmitting LSA on an interface. It ranges from 1 to
3600 and defaults to 5.
Description
Use the
ospf timer retransmit
command to configure the interval for LSA
retransmission on an interface.