Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 2 RIP Configuration Commands
Huawei Technologies Proprietary
2-16
Parameter
value
: Additional route metric added when receiving a RIP route, ranging from 0 to 16.
By default, the value is 0.
Description
Use the
rip metricin
command to configure the additional route metric added to the
RIP routes received on an interface.
Use the
undo rip metricin
command to restore the default value of this additional route
metric.
Related command:
rip metricout
.
Example
# Set the additional route metric added to RIP routes received on Vlan-interface 10 to 2.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface Vlan-interface 10
[Quidway-Vlan-interface10] rip metricin 2
2.1.18 rip metricout
Syntax
rip metricout value
undo rip metricout
View
Interface view
Parameter
value
: Additional route metric added when transmitting a RIP route, ranging from 1 to
16. By default, the value is 1.