Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 Static Route Configuration
Commands
Huawei Technologies Proprietary
1-7
<Quidway> display ip routing-table 169.253.0.0
Destination/Mask
Protocol
Pre
Cost
Nexthop
Interface
169.0.0.0/8
Static
60
0
2.1.1.1
LoopBack1
# There are corresponding routes in the natural mask range. Display detailed
information.
<Quidway> display ip routing-table 169.0.0.0 verbose
Routing tables:
+ = Active Route, - = Last Active, # = Both * = Next hop in use
Summary count: 1
**Destination: 169.0.0.0 Mask: 255.255.255.0
Protocol: #STATIC Preference: 60
*NextHop: 2.1.1.1 Interface: 2.1.1.1(LoopBack1)
Vlinkindex: 0
State: <Int ActiveU Gateway Static Unicast>
Age: 4:49 Cost: 0/0 Tag: 0
# There is no corresponding route in the natural mask range (only the longest matched
route is displayed). Display the detailed information.
<Quidway> display ip routing-table 169.253.0.0 verbose
Routing Tables:
+ = Active Route, - = Last Active, # = Both * = Next hop in use
Summary count:1
**Destination: 169.0.0.0 Mask: 255.0.0.0
Protocol: #Static Preference: -60
*NextHop: 2.1.1.1 Interface: 2.1.1.1(LoopBack1)
Vlinkindex: 0
State: <Int ActiveU Static Unicast>
Age: 3:47 Cost: 0/0 Tag: 0
For detailed description of the output information, see Table 1-2.
1.1.4 display ip routing-table ip-address1 ip-address2
Syntax
display ip routing-table
ip-address1
mask1
ip-address2
mask2
[
verbose
]
View
Any view
Parameter
ip-address1, ip-address2
: Destination IP address in dotted decimal notation.
ip-address1, mask1
and
ip-address2, mask2
determine one address range
together. .
ip-address1
ANDed
with
mask1
specifies the start of the range, while