Command Manual – Port Basic Configuration
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 Port Basic Configuration
Commands
Huawei Technologies Proprietary
1-30
1.1.31 shutdown
Syntax
shutdown
undo shutdown
View
Ethernet port view
Parameter
None
Description
Use the
shutdown
command to disable an Ethernet port.
Use the
undo
shutdown
command to enable an Ethernet port.
By default, an Ethernet port is enabled.
Example
# Enable Ethernet1/0/1.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface ethernet 1/0/1
[Quidway-Ethernet1/0/1] shutdown
[Quidway-Ethernet1/0/1] undo shutdown
1.1.32 speed
Syntax
speed
{
10
|
100
|
1000
|
auto
}
undo speed
View
Ethernet port view
Parameter
10
: Specifies the port speed to 10 Mbps.
100
: Specifies the port speed to 100 Mbps.
1000
: Specifies the port speed to 1000 Mbps (this argument is valid for Gigabit ports
only).
auto
: Specifies the port speed to the auto-negotiation mode.