Huawei Quidway S3100 Series, Руководство по эксплуатации

Страница: 45 / 514

Operation Manual – Login
Quidway S3100 Series Ethernet Switches
Chapter 2 Logging in through the Console Port
Huawei Technologies Proprietary
2-7
Operation Command Description
Set the history command
buffer size history-command
max-size value
Optional
The default history command
buffer size is 10. That is, a
history command buffer can
store up to 10 commands by
default.
Set the timeout time for
the user interface
idle-timeout minutes
[ seconds ]
Optional
The default timeout time of a
user interface is 10 minutes.
With the timeout time being
10 minutes, the connection to
a user interface is terminated
if no operation is performed
in the user interface within 10
minutes.
You can use the
idle-timeout 0 command to
disable the timeout function.
Note that the command level available to users logging into a switch depends on both
the authentication-mode { password | scheme | none } command and the user
privilege level level command, as listed in the following table.
Table 2-5 Determine the command level (A)
Scenario
Authentication mode User type Command
Command
level
The user privilege
level level command
not executed
Level 3
None
(
authentication-mode
none )
Users logging
in through
Console ports
The user privilege
level level command
already executed
Determined
by the
level
argument
2.4.2 Configuration Example
I. Network requirements
Assume that you are a level 3 VTY user and want to perform the following configuration
for users logging in through the Console port:
z
Do not authenticate users logging in through the Console port.
z
Commands of level 2 are available to users logging into the AUX user interface.
z
The baud rate of the Console port is 19,200 bps.
z
The screen can contain up to 30 lines.