manualshive.com logo in svg

Huawei NetCol5000-C030H90D0, Руководство пользователя

Поделиться
Скачать
Huawei NetCol5000-C030H90D0 Скачать руководство пользователя страница 195

Figure 7-30 Importing a certificate

Step 2 Select Client certificate or Server certificate based on the type of the certificate

in use.

Step 3 Tap Browse... next to Upload CA certificate file.

Step 4 Select the CA certificate file to be imported.

Step 5 Upload the local certificate file and the key file in turn in the same way.

Step 6 Enter Key password and Confirm key password.

Step 7 Tap Submit.

●

If files are imported successfully, a success message will be displayed.

●

If files fail to be imported, the message indicating the cause for failure will be

displayed. Rectify the fault according to the message and import files again.

----End

7.2 WebUI Operations

7.2.1 How to Manage WebUI Users?

Context

WebUI users are classified as Administrator and Operator. They have different

operation rights.

●

Administrator: The user name is admin and password is Changeme by

default. The administrator has all rights, including the rights for user

management, browsing and modifying parameters, software upgrade, and

data import and export.

●

Operator: The user name is operator and password is Changeme by default.

Operator has no rights for network security certification, Modbus, SNMP,

software upgrade, and fault information.

NO TE

If the software version is V200R001C00 or earlier, SNMP and Modbus-TCP are not

supported.

NetCol5000-C(030, 032, 065) In-row Chilled Water

Smart Cooling Product

User Manual (2019)

7 FAQ

Issue 03 (2020-08-30)

Copyright © Huawei Technologies Co., Ltd.

187

Содержание NetCol5000-C030H90D0















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды