Huawei NetCol5000-A-035 Скачать руководство пользователя страница 107

Страница: 107 / 244

Parameter Specification Setting Method

Connectio

n mode

Server, Client,

client

This parameter is configurable when Protocol is

set to Modbus TCP.
● Server: If the smart cooling product and EMS do

not need to access the Internet (the smart

cooling product and the EMS are in the same

LAN), set Connection mode to Server.

● Client: If the smart cooling product and EMS

need to access the Internet, set Connection

mode to Client.

● client: This option provides functions of

both the Server and Client options.

EMS IP

address

Enter the actual IP address of the EMS. IP

addresses of the display panel, client EMS, and

server EMS must be unique. This parameter is

configurable when Connection mode is set to

Client.

EMS port

It is recommended that you retain the default

value 16100. If you need to change the value,

enter a value as required. This parameter is

configurable when Connection mode is set to

Client.

----End

4.5.2.6 Setting Teamwork Control Parameters

Prerequisites

Assign teamwork control numbers and addresses for the teamwork controlled

smart cooling products as follows:
●

Teamwork group no: Group the smart cooling products in adjacent areas as

one, that is, assign one teamwork control number for them. At most four

teamwork control groups can be assigned (1–4).

●

Teamwork unit address: The address for the smart cooling product in the

same group cannot be the same (address range: 1–32). The smart cooling

product addressed 1 is the master one that collects, processes, and delivers

data. Set the unit address numbers from one to the number of units in this

group. If the address of a device exceeds the range, the device cannot enter

the teamwork control. If the address of any unit amid the range is

unavailable, the teamwork topology shows that this device is offline.

Context

●

The figures and parameters in this section are for reference only. Set actually

parameter values as required.

●

To change alarm settings, log in as the Admin or Engineer user.

NetCol5000-A(025, 035) In-row Air Cooled Smart

Cooling Product

User Manual (600 mm Width)

4 ACC Introduction

Issue 17 (2020-10-22)

Содержание NetCol5000-A-035





















































































































































































































































Результаты поиска

Содержание NetCol5000-A-035

Отзывы:

Бренды по названию

Популярные бренды

Huawei NetCol5000-A-035, Руководство пользователя

Результаты поиска

Содержание NetCol5000-A-035

Отзывы:

Бренды по названию

Популярные бренды