Huawei NetCol5000-A-035 Скачать руководство пользователя страница 102

Страница: 102 / 244

Figure 4-7 Start and shutdown

NO TE

● If a power failure occurs and the smart cooling product is powered on again, the smart

cooling product automatically restores to the original state (start or shutdown) before

the power failure.

● The hardware port for controlling the status of the remote dry contact or On/Off

status on remote is reserved on the ACC. The status of the remote dry contact and

On/Off status on remote is on by default.

● The operations that start the smart cooling product successfully by the LCD button or by

element management system (EMS) is effective only when the remote dry contact or

On/Off status on remote is on the status of on.

● In start mode, the Start button is green (unavailable) and the Shutdown button is gray

(available).

● In shutdown mode, the Shutdown button is green (unavailable) and the Start button is

gray (available).

----End

4.5.2.3 Setting Temperature and Humidity Values

Context

To set T/H control type, Temp control mode, cold aisle sensors 1, 2, and 3, and

hot aisle sensors 1, 2, and 3, log in as the Admin or Engineer user. To set other

parameters, log in as the Admin, Engineer, or Operator user.

Procedure

Step 1 On the home screen, choose Settings > System Settings > T/H Sensor.

Figure

4-8

is displayed.

NetCol5000-A(025, 035) In-row Air Cooled Smart

Cooling Product

User Manual (600 mm Width)

4 ACC Introduction

Issue 17 (2020-10-22)

Содержание NetCol5000-A-035





















































































































































































































































Результаты поиска

Содержание NetCol5000-A-035

Отзывы:

Похожие инструкции для NetCol5000-A-035

Бренды по названию

Популярные бренды

Huawei NetCol5000-A-035, Руководство пользователя

Результаты поиска

Содержание NetCol5000-A-035

Отзывы:

Похожие инструкции для NetCol5000-A-035

Бренды по названию

Популярные бренды