manualshive.com logo in svg

Huawei LUNA2000 Series, Руководство пользователя, Страница: 26 / 96

Поделиться
Скачать
Huawei LUNA2000 Series Скачать руководство пользователя страница 26

3

 Application Scenarios and Settings

The LUNA2000 battery is mainly used in grid-tied systems of residential rooftop

PV plants. The system can be classified into the following three types based on

application scenarios:
●

Grid-tied energy storage system (ESS)

●

Grid-tied and off-grid ESS

●

Off-grid ESS

Multiple working modes can be set, such as maximum self-consumption, time-of-

use, and fully fed to the grid.

3.1 Grid-tied ESS

3.1.1 Grid-tied ESS Networking

Networking 1: In Batteries

The grid-tied ESS consists of the PV strings, LUNA2000 batteries, inverter, AC

switch, load, power distribution unit (PDU), and grid.
The SUN2000-(2KTL–6KTL)-L1 or SUN2000-(3KTL–10KTL)-M1 inverters are

supported.
The PV string converts solar energy into electric energy, which is then converted by

the inverter into power for loads and then fed to the power grid.

LUNA2000-(5-30)-S0

User Manual

3 Application Scenarios and Settings

Issue 01 (2020-10-20)

Copyright © Huawei Technologies Co., Ltd.

20

Содержание LUNA2000 Series

































































































Отзывы:

Нет отзывов