Huawei LUNA2000-30-S0 Скачать руководство пользователя страница 3

Страница: 3 / 129

About This Document

Purpose

This document describes the LUNA2000 battery in terms of its overview,

application scenarios, installation and commissioning, system maintenance, and

technical specifications. The LUNA2000 battery consists of a LUNA2000-5KW-C0

power control module and LUNA2000-5-E0 battery expansion modules.

Intended Audience

This document is intended for:

●

Sales engineers

●

System engineers

●

Technical support engineers

●

End users

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates a hazard with a high level of risk which, if not

avoided, will result in death or serious injury.

Indicates a hazard with a medium level of risk which, if not

avoided, could result in death or serious injury.

Indicates a hazard with a low level of risk which, if not

avoided, could result in minor or moderate injury.

Indicates warning information about device or environment

security which, if not avoided, could result in equipment

damage, data loss, performance deterioration, or

unanticipated results.
NOTICE is used to address practices not related to personal

injury.

LUNA2000-(5-30)-S0

User Manual

About This Document

Issue 07 (2022-01-10)

Содержание LUNA2000-30-S0


































































































































Результаты поиска

Содержание LUNA2000-30-S0

Отзывы:

Похожие инструкции для LUNA2000-30-S0

Бренды по названию

Популярные бренды

Huawei LUNA2000-30-S0, Руководство пользователя

Результаты поиска

Содержание LUNA2000-30-S0

Отзывы:

Похожие инструкции для LUNA2000-30-S0

Бренды по названию

Популярные бренды