Huawei LUNA2000-30-S0 Скачать руководство пользователя страница 16

Страница: 16 / 129

The product can be delivered to the site directly and transported by land and

water. The packing case must be secured for transportation, compliant with

related China standards, and printed with marks such as anti-collision and

moisture prevention. Affected by external environment factors, such as

temperature, transportation, and storage, the product specifications at the delivery

date prevail.
Protect the packing case with the product from the following situations:
●

Being dampened by rains, snows, or falling into water

●

Falling or mechanical impact

●

Being upside-down or tilted

CA UTION

If the batteries leak or have bulges, do not transport them. Contact a battery

recycling company for disposal.

1.6 Mechanical Safety

Using Ladders

●

Use wooden or fiberglass ladders when you need to perform live working at

heights.

●

When a step ladder is used, ensure that the pull ropes are secured and the

ladder is held firm.

●

Before using a ladder, check that it is intact and confirm its load bearing

capacity. Do not overload it.

●

Ensure that the wider end of the ladder is at the bottom, or protective

measures have been taken at the bottom to prevent the ladder from sliding.

●

Ensure that the ladder is securely positioned. The recommended angle for a

ladder against the floor is 75 degrees, as shown in the following figure. An

angle rule can be used to measure the angle.

LUNA2000-(5-30)-S0

User Manual

1 Safety Precautions

Issue 07 (2022-01-10)

Содержание LUNA2000-30-S0


































































































































Результаты поиска

Содержание LUNA2000-30-S0

Отзывы:

Похожие инструкции для LUNA2000-30-S0

Бренды по названию

Популярные бренды

Huawei LUNA2000-30-S0, Руководство пользователя

Результаты поиска

Содержание LUNA2000-30-S0

Отзывы:

Похожие инструкции для LUNA2000-30-S0

Бренды по названию

Популярные бренды