Huawei LampSite Скачать руководство пользователя

Страница: 7 / 100

Draft C (2014-03-26)

This is a draft release.

Compared with Draft B (2014-02-28), no information is added.

Compared with Draft B (2014-02-28), this issue incorporates the following changes:

Content

Change Description

4.4.7 Installing CRPI Optical Cables

Added the description of connecting the
CPRI cable to the TX and RX ports of the
optical module crossly.

5.1.4 pRRU Installation Environment
Requirements

The operating temperature of pRRU is
updated.

Compared with Draft B (2014-02-28), no information is deleted.

Draft B (2014-02-28)

This is a draft release.

Compared with draft A (2013-11-30), this issue includes the following new topics:

5.2 Obtaining the MAC Address (Optional)

5.7.3 Cable Connections

6.1 MAC Collection Template

Compared with draft A (2013-11-30), this issue incorporates the following changes:

Content

Change Description

Entire document

Added descriptions about pRRUs with three
transmission ports. Such pRRUs support
integrated Wi-Fi services.

Added the descriptions about the UMTS, LTE
FDD and UMTS+LTE FDD mode.

About This Document

Optimized descriptions about matching
product versions.

4.4.6 Installing an Ethernet Cable

Changed the cable name from RHUB-pRRU
Ethernet cable to Ethernet cable.

5.7.6 Installing an Ethernet Cable

Compared with draft A (2013-11-30), this issue excludes the following topics:

Installing External Antennas (Optional)

RHUB Exterior

LampSite
Installation Guide

1 Changes in LampSite Installation Guide

Issue 02 (2014-05-27)

Huawei Proprietary and Confidential

Содержание LampSite





































































































Результаты поиска

Содержание LampSite

Отзывы:

Похожие инструкции для LampSite

Бренды по названию

Популярные бренды

Huawei LampSite, Руководство по установке

Результаты поиска

Содержание LampSite

Отзывы:

Похожие инструкции для LampSite

Бренды по названию

Популярные бренды